CJWWP - CIRCUITWORKS CONDUCTIVE EPOXY PART A (ADHESIVE), CW2400 BLK

  • MSDS: CJWWP
  • Manufacturer: CHEMTRONICS INC
  • Product Name: CIRCUITWORKS CONDUCTIVE EPOXY PART A (ADHESIVE), CW2400 BLK
  • National Stock Number: 8040-00N092959
Product Identification

Product ID:CIRCUITWORKS CONDUCTIVE EPOXY PART A (ADHESIVE), CW2400 BLK
MSDS Date:02/24/1998
FSC:8040
NIIN:00N092959
Status Code:A
Kit Part:Y
MSDS Number: CJWWP

Responsible Party
CHEMTRONICS INC
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
US

Emergency Phone: (800)424-9300

Info Phone: 800-645-5244; 800-832-4401

Preparer: DR. MO TAZI

Cage: 21267

Contractor
CHEMTRONICS INC
KENNESAW, GA 30152 US

Telephone: 770-424-4888/800-645-5244

Cage: 21267

Ingredients

(ORAL,

CAS: 7440-22-4

RTECS: VW3500000

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


EPICHLOROHYDRIN-BISPHENOL A EPOXY RESIN; (EPOXY RESIN)

CAS: 25068-38-6

RTECS: CE6880000


MODIFIED EPOXY ESTER

Hazards

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: LIQUID AND VAPORS OF THIS
PRODUCT MAY CAUSE EYE INJURY WHICH MAY PERSIST FOR SEVERAL DAYS.
SKIN: CONTACT MAY CAUSE SKIN INJURY (REDDENING AND SWELLING).
SENSITIZER - MAY CAUSE ALLERGIC SKIN REAC TION. INGESTION: HARMFUL
IF SWALLOWED. RESIN IS SLIGHTLY TOXIC. SILVER INGESTION MAY RESULT
IN GENERALIZED ARGYRIA. INHALATION: NO SPECIFIC INFORMATION
AVAILABLE. HEATING CAN GENERATE VAPORS THAT COUL D CAUSE HEADACHES,
NAUSEA, DIZZINESS AND RESPIRATORY IRRITATION IF INHALED.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:HEART, LUNG, EYE, SKIN.

First Aid

First Aid:EYES: IMMEDIATELY FLUSH W/LARGE AMOUNTS OF WATER. AFTER
INITIAL FLUSHING, REMOVE ANY CONTACT LENSES & CONTINUE FLUSHING FOR
AT LEAST 15 MINUTES. HAVE EYES EXAMINED BY PHYSICIAN. SKIN: REMOVE
CONTAMINA TED CLOTHING & WASH SKIN W/SOAP & WATER.GET MEDICAL
ATTENTION IF IRRITATION DEVELOPS OR PERSISTS. WASH CLOTHES
SEPARATELY BEFORE REUSE. INGESTION: IF APPRECIABLE QUANTITIES ARE
SWALLOWED, SEEK MEDICAL ATTENTION. INHALATION: IN CASE OF EXPOSURE
TO HIGH CONCENTRATIONS OF VAPOR OR MIST, REMOVE TO FRESH AIR. IF
BREATHING IS DIFFICULT, GIVE OXYGEN & CALL A PHYSICIAN. IF
BREATHING HAS STOPPED, APPLY ART IFICIAL RESPIRATION & CALL A
PHYSICIAN.

Fire Fighting

Flash Point Method:SCC
Flash Point:>93.3C, 200.F
Extinguishing Media:USE CARBON DIOXIDE OR DRY CHEMICALS FOR SMALL
FIRES; AQUEOUS FOAM OR WATER FOR LARGE FIRES INVOLVING THIS
MATERIAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . REMOVE ALL IGNITION SOURCES.

Accidental Release

Spill Release Procedures:LARGE SPILLS: REMOVE ALL SOURCES OF IGNIT
(SPARKS, OPEN FLAMES, ETC). WEAR A NIOSH APPRVD SCBA & APPROP
PERSONAL PROTECTIVE EQUIPMENT. VENT AREA & CONTAIN SPILL BY DIKING
&/OR ABSORBING W/INERT MATL. COLLECT SPILL BY SCOOPING UP LIQS &
ABSORB MATL & PLACE IN CHEMICAL WASTE CNTNR FOR PROPER DISPOSAL. DO
NOT FLUSH TO SEWER. PREVENT MATL FROM ENTERING STORM SEWERS,
DITCHES THAT LEAD TO (SUPDAT)

Handling

Handling and Storage Precautions:OVERHEATING MAY CAUSE CNTNR TO
RUPTURE. USE EXPLO PROOF ELEC EQUIP. CNTNRS MUST BE KEPT CLSD &
VENT PROVIDED TO PVNT VAP CONC BUILD-UP. STORE IN COOL, DRY PLACE.
DO NOT BREATHE VAP/GET LIQ INTO EYES O R ON SKINCLTHG. KEEP AWAY
FROM HEAT/IGNIT SOURCES. CHECK ALL CNTNRS FOR LEAKS. WEAR PROT
CLTHG.
Other Precautions:AVOID PRLNGD BRTHG OF VAPS OR CONTACT W/SKIN. ENSURE
THAT ALL EQUIP IS GROUNDED TO PREVENT STATIC DISCHARGE. CNTNRS OF
THIS MATL MAY BE HAZ WHEN EMPTIED DUE TO SOLID OR VAP RESIDUE. ALL
HAZ PRECAUTION S GIVEN IN THIS DATA SHEET MUST BE OBSERVED FOR
EMPTY CNTNRS. KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:GOOD GEN VENT SHOULD BE SUFFICIENT TO CTL AIRBORNE LEVELS.
LOC EXHST VENT MAY BE NECESSARY TO CTL ANY AIR CONTAMINANTS TO W/IN
THEIR TLVS DURING USE OF PROD.
Protective Gloves:RUBBER OR OTHER CHEMICALLY RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH AND DELUGE SHOWER .
Supplemental Safety and Health
SPILL PROC: WATERWAYS & GROUND. SMALL SPILLS: ABSORB SPILL W/ABSORB
MATL, THEN PLACE IN CHEM WASTE CNTNR FOR PROPER DISPOSAL. EXPOS
GUIDELINES: SILVER - ACGIH TLV: 0.1 MG/M3; OSHA PEL: 0.01 MG/M3;
ACG IH STEL: N/A. EPOXY RESIN & MODIFIED EPOXY ESTER - ACGIH TLV,
OSHA PEL, ACGIH STEL: N/A.

Chemical Properties

Boiling Pt:>148.3C, 299.F
B.P. Text:BOILING TO >200F
Vapor Pres:<0.10 MMHG @20C (AIR 1)
Spec Gravity:2.5-2.8
Evaporation Rate & Reference:SLOWER (BUTYL ACETATE=1)
Solubility in Water:MODERATE <10%
Appearance and Odor:SILVER/GRAY PASTE; MILD ODOR.
Percent Volatiles by Volume:<0.5

Stability

Stability Indicator/Materials to Avoid:NO
AVOID STRONG OXIDIZING AGENTS, COPPER, COPPER ALLOYS, CARBON STEEL,
IRON AND RUST. AVOID STRONG ACIDS AND BASES. ALSO AVOID CAUSTICS,
AMINES, ALKALIS AND MERCAPTANS.
Stability Condition to Avoid:STORAGE ABOVE 120F, EXPOSURE TO LIGHT,
LOSS OF DISSOLVED AIR, LOSS OF POLYMERIZATION, INHIBITOR,
CONTAMINATION WITH INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.
Conditions to Avoid Polymerization:POLYMERIZATION INITIATORS INCLUDING
PEROXIDES, STRONG OXIDIZING AGENTS, COPPER, COPPER ALLOYS, CARBON
STEEL, (OTHER INFO)

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL, STATE
AND LOCAL REGULATIONS. WATER RUNOFF CAN CAUSE ENVIRONMENTAL DAMAGE.

Toxicology

Toxicological Information:LD50: (ORAL, RAT) - MODIFIED EPOXY ESTER:
N/A. LD50: (DERMAL, RABBIT) - SILVER (METALLIC): N/A. EPOXY RESIN:
>20 ML/KGL. MODIFIED EPOXY RESIN: N/A. LC50 (PPM) (INHALATION, RAT)
- SILVER (METALLIC): N/ A. EPOXY RESIN: N/A. MODIFIED EPOXY RESIN:
N/A. CANCER INFORMATION: NO INGREDIENTS LISTED ARE HUMAN
CARCINOGENS BY NTP OR IARC.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecology

Ecological:ENVIRONMENTAL IMPACT INFORMATION: AVOID RUNOFF INTO SEWERS
AND DITCHES WHICH LEAD TO WATERWAYS. WATER RUNOFF CAN CAUSE
ENVIRONMENTAL DAMAGE. REPORTING: US REGULATIONS REQUIRE REPORTING
SPILLS OF THIS MATERIAL THAT COULD REACH ANY SURFACE WATERS. THE
TOLL FREE NUMBER FOR THE US COAST GUARD NATIONAL RESPONSE CENTER
IS: 1-800-424-8802.

Transport

Transport Information:AIR AND GROUND SHIPMENTS: ADHESIVES, SEALANTS.
NOT REGULATED.

Regulatory

SARA Title III Information:SECTION 313 SUPPLIER NOTIFICATION: THIS
PRODUCT CONTAINS THE FOLLOWING TOXIC CHEMICALS SUBJECT TO THE
REPORTING REQUIREMENTS OF SECTION 313 OF THE EMERGENCY PLANNING AND
COMMUNITY RIGHT-TO-KNOW ACT OF 1986 (40 CFR 372): PRODUCT CONTAINS
NO SECTION 313 RATED CHEMICALS.
Federal Regulatory Information:THIS INFORMATION SHOULD BE INCLUDED ON
ALL MSDS COPIED AND DISTRIBUTED FOR THIS MATERIAL. TOXIC SUBSTANCES
CONTROL ACT (TSCA): ALL INGREDIENTS OF THIS PRODUCT ARE LISTED ON
THE TSCA INVENTORY. WHMIS I NGREDIENT DISCLOSURE LIST: NONE.
STATUS: NONCONTROLLED.